Nupol Composites

Nupol Composites
49-61 Stephen Road,
Botany, NSW, 2019
Australia
Phone: +612 9666 0331
Fax: +612 9666 3872

Products

Information

Documents

CORES

Click here to email a Data Sheet request

Divinycell Foams	Density (kg/m3)
Divinycell H45	45
Divinycell H60	60
Divinycell H80	80
Divinycell H100	100
DivinycellH130	130
Divinycell H200	200
Divinycell H250	250
Divinycell HCP30	200
Divinycell HCP50	250
Divinycell HCP70	300
Divinycell HCP90	360
Divinycell HCP100	400
Divinycell HT50	50
Divinycell HT70	70
Divinycell HT110	110
Divinycell HT90	90
Divinycell HD100 P	100
Divinycell HD130	130
Divinycell HD180	180
Divinycell HD250	250

Divinycell PVC foam is a high performance core material for multifunctional sandwich constructions. The H grade is used in a wide range of applications where there is a need for a strong, lightweight construction material with excellent mechanical characteristics. Divinycell is widely used and found in wind turbine blades, pleasure craft, ship hulls and truck bodies.

Divinycell H grade is a general purpose grade suitable for most sandwhich applicaitons.
Divinycell HT grade is designed for use with prepreg systems and has very good residual strength at high service temperatures.
Divinycell HPS grade is for use with epoxy prepreg systems, service life up to 90C.
Divinycell HCP grade is a high density core for subsea use.
Divinycell HD grade was developed for use in primary marine structures that are subject to high slamming and shock loads.

Divinycell is available in
* plain
* perforated
* stabilised
* grid scored
* grid scored mini
* infusion scored
* knife cut
* double cut (knife cut both sides).
In cases it is possible to have more than one type simultaneously.

Divinycell cores are availalbe in thicknesses from 4mm to 50mm.

Standard Plain sheet size is 1220mm x 2440mm (2.98m2)
Standard Contoured sheet size is 1200mm x 810mm (0.99m2)
Nb. Sheet sizes may vary depending on density

Divinycell is approved by:
Lloyd's Register London
Det Norke Veritas, Oslo
Germanishcher Lloyd, Hamburg
Nippon Kaiji Kyokai, Tokyo
Bureau Veritas, Paris
Korean Register of Shipping, Seoul

Probalsa	Area m?	Remarks
Pool Strip	0.186	Comes in square or bevel
Tile
PBPL	0.744 (1220mm x 610mm)	Plain uncoated
PBPL LGT	0.744	Light weight plain uncoated
PROC	0.744	Probalsa grid scored coated
PROC LGT	0.744	Probalsa light weight grid scored coated
PBGS	0.744	Grid scored uncoated
PBGS LGT	0.744	Grid scored uncoated light
PBPLC	0.744	Plain coated
PBPLC Perf	0.744	Plain coated perforated

Balsa is a natrual resource from plantations. Being a natural organic material, it varies in moisture content (12% +/- 4%) at time of fabrication, and the densities of the sheets can vary between 121kg/m3 and 184kg/m3. Balsa is also subject to warping in humid environments, therefore it is available in coated and uncoated shets, as well as grid scored/scrim backed. Plain sheets as well as pre-cut kits and Balsa-cored sheets using ply or other types of skins are also available.

Probalsa lightweight is a low density balsa core for weight critical applications.
Probalsa standard provides an excellent combination of high strength and low weight.
Probalsa heavy is a high density, high strength version of probalsa standard for highly loaded applications.

Probalsa is resin-primed. Pre-priming speeds the build process and greatly reduces the absorption of resin. Pro Balsa can be suppplied plain or grid-scored in sheets 609mm x 1219mm (2ft x 4ft). Grid-scored sheets are cut in a grid pattern with an open weave fibreglass scrim affixed to give a flexible sheet.

Probalsa comes in thicknesses from 4mm to 60mm.

Pro Balsa core materials are approved by all major classification societies including American Bureau of Shipping, Lloyd's Register of Shipping, Det Norske Veritas and Germanishcher Lloyds.

Coremat	Thickness (mm)	Width	Remarks
Coremat Type XX	1,2,3,4,5	1m
Coremat Type XI	1,2,3,4,5	1m
Coremat Type XM	2,3,4,10	1m
Soric Type XF	2,3	1.27m	Large cells, excellent flow, low resin consumption
Soric Type SF	2,3	1.27m	Small cells, good flow, a bit higher resin consumption
Soric Type TF	2	1.27m	Dotted Cells, very good surface finish, reasonable flow

Coremat XI incorporates a resin control system, enabling the processor to assess the impregnation with resin. Coremat XI is purple in colour, the addition of resin triggers a colour change to its natural white state. This makes it simple to determine when it is impregnated with resin. Optimum properties are achieved thanks to the colour change, allowing a better control of resin consumption. Insufficient impregnation will show purple spots. Resin can be added until the purple spots disappear.

Compatible with all polyester and vinyl ester resins.

Coremat XM has a unique honeycomb structure for excellent drapeability, both Coremat products offer low resin consumption, fast wet-out, fast de-airing, & are easily handled creating increased efficiency.

Lloyds appoval.
American Bureau of Shipping approval.
Det Norske Veritas approval.

LANTOR SORIC

Benifits
Save weight 20-35%. Save resin and glass. Excellent resin flow. Constant thickness. Engineering flexibility. Good mechanical properties.

Properties
Polyester nonwoven. Pressure stable. Honeycomb structure. Easy to process. Open structure.

Closed mould processes
Vacuum infusion. RTM. Cold and hot press moulding. Pre-pregs. Pultrusion. Continuous sheet processing. Filament winding.

DIAB Foams	Density (kg/m3)
TR55	55
TR75	75
TR100	100
TR130	130
TR200	200
TR260	260
TR300	300

TR grade is specially formulated and processed for compatability with high process and service temperature applications.

All grades are available in plain sheet or grid scored. Also available in kit form.

Urethane Slabstock	Thickness (mm)	Area m	Product Code	Remarks
Urethane	25	2.98	619767	In stock
Urethane	50	2.98	619783	In stock
Urethane	75	2.98	619807	In stock
Urethane	100	2.98	619823	In stock
Urethane	15, 20, 30, 40, 90, 125, 130, 150, 200	2.98	Various

Urethane foams have excellent thermal insulation properties.

Back